Goodman - 2 Ton/60,000 BTU 80% AFUE Gas Furnace and Air Conditioner System - Horizontal - 14.5 SEER2 - R32 - GLXS3BN2410

Features

• Ideal size to cover a medium-sized house
• 2 ton, 13.4 SEER2 AC-only condenser
• R32: Complies with Clean Air Act New Refrigerant Requirements
• Low sound output
• Fully charged for up to 15' of line set
• Factory-installed filter drier
• 2.5 ton horizontal evaporator coil
• Can be used with heat pump and AC-only condensers
• R32: Complies with Clean Air Act New Refrigerant Requirements
• Galvanized, embossed, and insulated coil cabinet to protect the coil and prevent air leakage
• Factory-installed TXV kit
• This furnace is ideal to heat a medium-size house (in average climate conditions)
• 60,000 BTU 80% AFUE two stage variable speed natural gas furnace
• Requires metal flue venting
• Can be used in the upflow or horizontal orientation
• Can be converted to propane with an LP conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output
  

Specifications

Manual

• GLXS3B Specifications
• GLXS3B Installation Manual
  
• CHPTA Installation Manual
• CHPTA Specifications Sheet
• GMVC80 Installation Manual
• GMVC80 Brochure

What our Experts Think

Q&A

Q: What’s included in this HVAC system?
A: This matched system includes a 2 ton R32 air conditioner condenser (GLXS3BN2410) with 14.5 SEER2 cooling, a 60,000 BTU 80% AFUE gas furnace, and a horizontal evaporator coil (CHPTA2426B3) designed for horizontal installation.

Q: What cooling performance does the system provide?
A: The outdoor unit delivers 2 ton (≈24,000 BTU) cooling with up to 14.5 SEER2 efficiency, which helps balance energy savings and comfort in moderate climates.

Q: What does 80% AFUE mean for heating?
A: 80% AFUE means about 80 ¢ of every fuel dollar becomes usable heat, offering standard‑efficiency heating that’s reliable and cost‑effective.

Q: What refrigerant does this system use?
A: This system uses R32 refrigerant, a modern, energy‑efficient refrigerant with lower environmental impact than many older types.

Q: Is it suitable for horizontal installation?
A: Yes — the system is configured for horizontal installation, ideal for spaces with limited vertical clearance like attics, closets, or crawlspaces.

Q: What type of compressor and stages does it have?
A: The AC uses a single‑stage compressor for simple, dependable operation and consistent cooling performance.

Q: What are the benefits of matched components?
A: Matched components ensure optimized airflow, enhanced reliability, balanced heating & cooling performance, and full warranty compatibility compared with mismatched parts.

Maintenance Tips

• Replace Air Filters Regularly: Inspect monthly and replace every 1–3 months to maintain airflow and protect both furnace and AC components.

• Keep Vents & Registers Clear: Ensure supply and return vents are unobstructed for consistent heating and cooling.

• Inspect Furnace Venting: Check intake and exhaust pipes for blockages or damage to maintain safe operation.

• Clean Around the Units: Maintain 2–3 ft clearance around furnace and condenser to prevent dust buildup and allow proper airflow.

• Check Thermostat & Electricals: Verify thermostat settings, gas supply, and 115V/208–230V circuits are functioning properly.

• Monitor System Performance: Listen for unusual noises from the blower or condenser; reduced heating or cooling efficiency may indicate maintenance needs.

• Schedule Annual Professional Service: A licensed HVAC technician should inspect burners, heat exchanger, gas pressure, AC refrigerant charge, and safety controls yearly.