Goodman - 2.5 Ton/80,000 BTU 80% AFUE Gas Furnace and Air Conditioner System - Horizontal - 14.5 SEER2 - R32 - CHPTA3630C3

Goodman - 2.5 Ton/80,000 BTU 80% AFUE Gas Furnace and Air Conditioner System - Horizontal - 14.5 SEER2 - R32 - CHPTA3630C3 

A Goodman gas furnace and air conditioner system is a great choice to keep your home comfortable all season long. With tons of extra features and a great price, a Goodman gas furnace and air conditioner system is the perfect choice for all of your heating and cooling needs.

Features

• Ideal size to cover a medium-sized house
• 2.5 ton, 13.4 SEER2 AC-only condenser
• R32: Complies with Clean Air Act New Refrigerant Requirements
• Low sound output
• Fully charged for up to 15' of line set
• Factory-installed filter drier
• 3 ton horizontal evaporator coil
• Can be used with heat pump and AC-only condensers
• R32: Complies with Clean Air Act New Refrigerant Requirements
• Galvanized, embossed, and insulated coil cabinet to protect the coil and prevent air leakage
• Factory-installed TXV kit
• This furnace is ideal to heat a medium-sized house (in average climate conditions)
• 80,000 BTU 80% AFUE two stage variable speed natural gas furnace
• Requires metal flue venting
• Can be used in the upflow or horizontal orientation
• Can be converted to propane with an LP conversion kit (sold separately)
• Innovative design for electrical efficiency, safety, and lower sound output
  

Specifications

Manual

• GLXS3B Specifications
• GLXS3B Installation Manual
  
• CHPTA Installation Manual
• CHPTA Specifications Sheet
• GMVC80 Installation Manual
• GMVC80 Brochure

What our Experts Think

Q&A

Q: What’s included in this HVAC system?
A: A complete matched cooling and heating split system with: a 2.5 ton R32 air conditioner condenser, a horizontal evaporator coil (CHPTA3630C3), and an 80,000 BTU 80% AFUE gas furnace — all designed for horizontal installation and compatible refrigerant.

Q: How much cooling capacity does the AC unit provide?
A: The air conditioner delivers 2.5 tons of cooling (~30,000 BTU) with up to 14.5 SEER2 efficiency, helping lower seasonal cooling costs compared with lower‑SEER models.

Q: What does 80% AFUE mean for the furnace?
A: 80% AFUE means about 80 ¢ of every dollar spent on fuel becomes usable heat for your home, making it a standard‑efficiency furnace that balances performance and operating cost.

Q: What refrigerant does this system use and why it matters?
A: This system operates on R32 refrigerant, a modern and more environmentally friendly option designed to improve efficiency and meet current environmental regulations.

Q: What type of furnace motor and airflow features are typical?
A: The gas furnace uses a multi‑speed ECM blower, which enhances airflow control and quiet operation compared with basic motors, though exact blower specs vary by furnace model.

Q: What installation configuration is supported?
A: Designed for horizontal — and often upflow/horizontal — installation, making it a good choice for attics, closets, or spaces with limited vertical height.

Maintenance Tips

• Replace Air Filters Regularly: Inspect monthly and replace every 1–3 months to maintain airflow and protect both furnace and AC components.

• Keep Vents & Registers Clear: Ensure supply and return vents are unobstructed for even heating and cooling.

• Inspect Furnace Venting: Check intake and exhaust pipes for blockages or damage to maintain safe operation.

• Clean Around the Units: Maintain 2–3 ft clearance around furnace and condenser to prevent dust buildup and allow proper airflow.

• Check Thermostat & Electricals: Verify thermostat settings, gas supply, and 115V/208–230V circuits for proper operation.

• Monitor System Performance: Listen for unusual noises from the blower or condenser; reduced heating or cooling may indicate service is needed.

• Schedule Annual Professional Service: A licensed HVAC technician should inspect burners, heat exchanger, gas pressure, AC refrigerant charge, and safety controls yearly.